"Unmanned Aerial Vehicle (UAV) "



Medium UAV Specification

L x W x H	1470mm x 510mm x 685mm
Main Rotor Diameter	2010mm
Tail Rotor Diameter	360mm
Engine	3.4kW electric motor, 23cc Methanol, 23cc Diesel, Gasoline, Alcohol
Climb Rate	122mpm, 400 fpm (AFCS regulated)
Maximum Speed	50kph, 31mph (AFCS regulated)
Endurance	up to 1.5hr (depending on options, altitude, fuel load)
Maximum Payload	up to 15kg (depending on options, altitude, fuel load)
Telemetry	802.11-based, 800m, LOS range (other system available)
Safety Controller	72Mhz, 730m, LOS range
Generator	150W, 12V power bus with battery backup

An optional three-axis motorized gimbal provides a controllable platform for a variety of sensors including video, IR, and still cameras, as well as spectrometers and other measurement devices.? Sensor data can be transmitted real-time to the user via broadband RF. Basic avionics components, included of a laptop computer, attitude and heading reference system, referred to as AHRS, GPS receiver, a heading-hold gyro, and other avionics command/control components.

Some additional options:

• Camera platform with motion control and tracking
• High performance GPS
• Weather proofing canopy
• Spinning mass gyro stabilization for camera platform
• Day, night and thermal camera
• Analog or digital video transmission range from 1km to 50km
• Tracking antenna option