"Unmanned Aerial Vehicle (UAV) "



Large UAV Specification

L x W x H	2790mm x 760mm x 860mm
Main Rotor Diameter	3000mm
Tail Rotor Diameter	700mm
Engine	121cc, 8.7 HP, 2-stroke gasoline, turbine engine
Climb Rate	122mpm, 400 fpm (AFCS regulated)
Maximum Speed	80kph, 50 mph (AFCS regulated)
Endurance	up to 4hr (depending on options, altitude, fuel load)
Maximum Payload	up to 50kg (depending on options, altitude, fuel load)
Telemetry	802.11-based, 800m, LOS range (other system available)
Safety Controller	72Mhz, 730m, LOS range
Generator	150W, 12V power bus with battery backup

An optional three-axis motorized gimbal provides a controllable platform for a variety of sensors including video, IR, and still cameras, as well as spectrometers and other measurement devices.? Sensor data can be transmitted real-time to the user via broadband RF. Basic avionics components, included of a laptop computer, attitude and heading reference system, referred to as AHRS, GPS receiver, a heading-hold gyro, and other avionics command/control components.

Some additional options:

• Camera platform with motion control and tracking
• High performance GPS
• Weather proofing canopy
• Spinning mass gyro stabilization for camera platform
• Day, night and thermal camera
• Analog or digital video transmission range from 1km to 50km
• Tracking antenna option